How to Fix the file is too large for the destination file system Error – If you  are transferring files greater than 4GB then you may get Error of the file is too large for the destination file system Error. in this post we will provide you steps to fix the file is too large for the destination file system Error.

Best Solution is to Convert FAT32 to NTFS as if your Drive is NTFS then you will not get the file is too large for the destination file system Error. The most common cause of this sort of message that I can think of is making a conversion from the NTFS file system, which is the default format for hard drives and you may need to install hard drive.

Any drive formatted with FAT32 is only capable of handling 4GB files. Anything larger than that, even if made up of smaller individual files, will not work. FAT32 simply cannot handle it. Here’s How to Fix Kmode Exception not Handled Error

The file is too large for the destination file system

When you try to transfer files larger than 4 GB to a USB drive or a partition on your hard drive, you are likely to receive the error that the file is too large for the destination file system. This is because some file systems have file size limit.

For example, the FAT32 file system, which is often used for USB drive, support files no larger than 4 GB, and FAT16 2GB. To fix this problem, you can use NTFS file system whose file size limit is 16EB. There are basically two ways to do it. One is to reformat the drive to NTFS file system, the other is to convert FAT32 to NTFS without data loss.

Fix the file is too large for the destination file system

Below we have mentioned three methods to fix the file is too large for the destination file system Error. If you are formatting your Drive don’t forget to take backup of your data. There are no external software needed to fix the file is too large for the destination file system Error.

1. Fix Using Command Prompt – Convert FAT32 to NTFS

1) Open your command prompt; Press this key combination: Win key + R to open Run dialog box.

2) Open Command as Administrator, just Enter cmd and confirm with Enter to open the Command Prompt.

3) Enter the convert command in Command Prompt to start the FAT32 to NTFS conversion.

4) Now, Run a command like convert <disk drive letter>: /fs:ntfs. Suppose, Your problematic storage drive letter is D. So, the command should be like this.

convert d: /fs:ntfs

5) The conversion process will start as soon as you press enter.

6) As soon as the conversion process completes your problem of the file is too large for the destination file system Error may have resolved. If this does not fix try next method given below to fix the file is too large for the destination file system Error.

7) This would successfully Fix The file is too large for the destination file system error without losing your existing data in the disk.

This command can also be used to convert FAT16 disks and works on Windows 10, Windows 8, Windows 8.1, Windows 7, Windows XP and Windows Vista. Below Steps is for Mac Devices

MAC OS X – HFS+ (Mac OS Extended)

• Open Finder
• Click or open the Applications folder.
• Click on Utilities.
• Click on Disk Utility.
• Locate the storage device or drive on the sidebar and make sure it’s selected or highlighted.
• Click on the Erase tab.
• In the Format option, select either exFAT or Mac OS Extended (Journaled).
• Type in the preferred name for the storage device.
• Click Erase and wait for it to finish.

---

2. Format your Device using NTFS file system

1. Right-click on your USB drive and select Format.

2. Now change the file system to NTFS (Default).

1. in the Allocation unit size dropdown select Default.

4.Click Start and if asked for confirmation click OK.

5.Let the process finish and again try to copy the files to your drive.

6. Next, try copying large files in the device earlier giving the error ‘The file is too large for the destination file system.’

---

3. Split the File in Windows

If above two solution to fix the file is too large for the destination file system does not work then you can split the file in windows to fix the file is too large for the destination file system. You can split the file. This works with a range of file types and splits the file into smaller chunks that you can either reform manually on the destination computer or will reform itself.

Just Search in Google for any Split File Software and install those software to split files. Once the large file has been split into smaller files, you can proceed to transferring the files one at a time into your storage device.

---

Why the file is too large for the destination file system Error Occurs

Ever Thought why the file is too large for the destination file system Error occurs while transferring the files. There are Different File System in Our PC/Windows – FAT, FAT32, exFAT and NTFS.

FAT, also known as FAT16, is a simple and robust file system. It does offer good performance but still cannot provides the same performance, scalability and reliability as the later file systems. For FAT, the maximum file size of a single file it supports is 2GB.

FAT32 is a file system suitable for small capacity hard disk. For FAT32, the maximum file size of a single file it supports is 4GB. The advantage of FAT32 is that it has the best compatibility can be applied on many platforms.

exFAT, also known as FAT64, is a file system that introduced in Windows Embedded 5.0 and above (including Windows CE 5.0/6.0, Windows Mobile5/6/6.1) by Microsoft. exFAT was rolled out to fill the gap of FAT32 and is more suitable for flash memory. However, it has bad compatibility and can be recognized by a few OS.

NTFS is the most widely used file system in PC currently. For NTFS, the maximum file size of a single file it supports reach up to 16TB. NTFS is recommended to be applied on large capacity external hard drives.

If you save files larger than 2GB to FAT16 partition or save files bigger than 4GB to FAT32 partition, the error “File is too large for destination file system” will emerge. Under these kinds of situations, the best way is to convert file system.

So you know How to Fix the file is too large for the destination file system. If you are facing any issue regarding How to Fix the file is too large for the destination file system then comment below and we will try to resolve the issue.